Working...

Your Cart

  • Your cart is empty

Back


Viewing 1 - 24 of 453

Loading search results...

Convert?h=150&w=230

SBT-EVO

SB TACTICAL
SB Tactical's SBT-EVO Pistol Stabilizing Brace was developed in conjunction with B&T USA and designed after the iconic B&T stock for HK platforms. It features an integral, side-folding mechanism, and an adjustable nylon strap. This model is compatible with CZ Scorpion Evo and has a black finish.
$199.99
Convert?h=150&w=230

Blackout Flash Hider

Advanced Armament Corp
223 Rem | 5.56 NATO
For the past decade, the military chosen and adopted Blackout flash hider has been considered one of the most effective small-arms flash hiders in the world. The three prong design all but eliminates visible flash on barrels as short as 10 inches. A high-strength, corrosion-resistant aerospace alloy and ultra-hard SCARmor finish provide the highest level of durability. This 90 tooth ratchet taper is for AAC's SR-5 for 5.56mm hosts.
223 Rem | 5.56 NATO
$90.99
Convert?h=150&w=230

MPX

SB TACTICAL
The MPX PSB is an innovative, three-position adjustable pistol stabilizing brace dimensioned to fit the receiver cuts of Sig MPX and MCX. It ships as a complete assembly, ready-to-install, along with an integral M1913 adjustable housing. Included is an adjustable nylon strap.
$199.99
Convert?h=150&w=230

PDW

SB TACTICAL
Designed in conjunction with Maxim Defense, the SBPDW Pistol Stabilizing Brace is 3-position adjustable and compatible with mil-spec bolt carrier groups and carbine buffers. It features a QD attachment point and a nylon strap. This model has a black finish.
$239.99
Convert?h=150&w=230

Keymod Offest

Daniel Defense
The Daniel Defense Offset Flashlight Mount is for use on the Daniel Defense SLiM Rail and other KeyMod rail systems. It is designed so that as the shooters forward hand grips the rail or vertical foregrip, the thumb has quick and perfect access to the rear button of his flashlight. Because the action of activating the light is quick and natural but deliberate, this setup eliminates the chance of unintentional light discharges. This mount is compatible with most common flashlights which have a 1" diameter battery tube.
$52.00
Convert?h=150&w=230

X-Ring

Tactical Solutions
The Tactical Solutions 10/22 Extended Magazine Release (EMR) lever is a great addition to any Ruger 10/22. It makes releasing the magazine as easy as lightly pulling a lever and is made from 6061-T6 aluminum with a gloss black finish.
$35.00
Convert?h=150&w=230

Mainspring Housing Flat

Wilson Combat
The addition of the Wilson Combat steel checkered (30 LPI) Mainspring Housing is a great way to improve the grip and appearance of your 1911 Auto. You'll be amazed at the quality of this part. It's fully machined from bar stock with real cut checkering. The checkered mainspring is a great drop-in enhancement. It has a low luster glass bead finish.
$46.99
Convert?h=150&w=230

Keymod

Daniel Defense
The Daniel Defense Bipod Mount Adapter is designed for use on the Daniel Defense SLiM Rail and other rail systems which utilize the KeyMod attachment method for mounting accessories. This lightweight adapter allows users to securely attach bipods with sling swivel stud mounts.
$47.00
Convert?h=150&w=230

X-Ring

Tactical Solutions
The Tactical Solutions 10/22 Extended Magazine Release (EMR) lever is a great addition to any Ruger 10/22. It makes releasing the magazine as easy as lightly pulling a lever and is made from 6061-T6 aluminum with a matte green finish.
$35.00
Convert?h=150&w=230

Mainspring Housing Flat

Wilson Combat
The addition of the Wilson Combat steel checkered (30 LPI) Mainspring Housing is a great way to improve the grip and appearance of your 1911 Auto. You'll be amazed at the quality of this part. It's fully machined from bar stock with real cut checkering. The checkered mainspring is a great drop-in enhancement. It has a low luster glass bead finish.
$44.99
Convert?h=150&w=230

X-Ring

Tactical Solutions
The Tactical Solutions 10/22 Extended Magazine Release (EMR) lever is a great addition to any Ruger 10/22. It makes releasing the magazine as easy as lightly pulling a lever and is made from 6061-T6 aluminum with a matte black.
$35.00
Convert?h=150&w=230

SBM4

SB TACTICAL
The SBM4 is the evolution of the original SB15 Pistol Stabilizing Brace. Its thinner, lighter and with enhanced 'cheek weld' ergonomics and increases stability. Included is an adjustable nylon strap. This model has a black finish.
$119.99
Convert?h=150&w=230

Bullet Proof

Wilson Combat
Wilson Combat Bullet Proof Extractors are machined from solid bar stock S7 tool steel and then specially heat treated. A Wilson exclusive, S7 is shock resistant with excellent toughness and high strength (tensile strength of 275,000 PSI), along with good wear resistance. This extractor requires minimal fitting for proper function and often will drop in some guns with only final tensioning required. Used in conjunction with a Wilson Combat firing pin stop, you can optimize extractor function for any 1911 pistol. It has an optimized hook design with location tolerances held to +/- .001" for maximum strength and case rim contact. Radiused corners offer extended life and smooth feeding while the full diameter rear shaft holds tension longer than factory parts. The Series 80 has a plunger retainer stud machined into the extractor. This retainer stud holds the firing pin safety plunger that is visible next to the disconnector rail in place on Colt-style Series 80 slides. All extractors designed to work in a Series 80 1911 will also work in all Series 70 guns. This model has a blued finish.
$31.99
Convert?h=150&w=230

30Cal Phantom LT/LTA QD Mount

Yankee Hill Machine Co
30 Caliber | 7.62mm

30 Caliber | 7.62mm
$74.70
Convert?h=150&w=230

MKIII Racker

Tactical Solutions
Tactical Solutions Ruger Racker fits your MKIII and 22/45 series bolts with tapered bolt ears. It gives the user a firm plqce to grip and cock the pistol.
$14.99
Convert?h=150&w=230

X-Ring

Tactical Solutions
Tactical Solutions X-Ring 10/22 Compensators are an easy way to accessorize your rifle. It is threaded to accept 1/2"x 28tpi and will fit a standard or Take Down Ruger 10/22. It is light and constructed from 6061-T6 aluminum. It has a .920" OD, 2" in length and features 360 degree porting. This compensator is matte black.
$35.00
Convert?h=150&w=230

Hand Guard Kit

CMMG
This 14" version of CMMG's free floating hand guard system, is designed to be compatible with all standard keymod accessories.
$145.99
Convert?h=150&w=230

700

Remington Firearms
N/A
This is a Remington model 700 short action bolt face. It is carbon steel with an externally adjustable X Mark Pro trigger.
N/A
$329.99
Convert?h=150&w=230

Barrel Nut

CMMG
This MK9 bolt assembly is made of 8620 steel and has a Phosphate finish.
$8.99
Convert?h=150&w=230

Hand Guard Kit

CMMG
This 9" version of CMMG's free floating hand guard system, is designed to be compatible with all standard keymod accessories.
$119.99
Convert?h=150&w=230

Phantom

Yankee Hill Machine Co

$74.70
Convert?h=150&w=230

1 O'clock

Daniel Defense
The Daniel Defense 1 O'clock Offset rail is optimized for mounting miniature red dot optics in the 1 o'clock (right hand) or 11 o'clock (left hand) positions for quick, non-magnified, transitions when employing magnified primary optics on AR-type rifles with Mil-STD 1913 rails. The geometry allows for zero cheek weld shift during the transition.
$39.00
Convert?h=150&w=230

Hand Guard Kit

CMMG
This 11" version of CMMGs free floating hand guard system, is designed to be compatible with all standard keymod accessories.
$131.99
Convert?h=150&w=230

Trigger System

Patriot Ordnance Factory
This single-stage, non-adjustable, drop-in trigger boasts a solid 3.5-pound pull weight and is pre-assembled in Hard coat Anodized aluminum housing for immediate competition, hunting, and tactical applications right out of the box. Carved from American A2 steel, the Trigger, Disconnect, and Hammer are all Nitride Heat-Treated to 70 Rockwell case hardness for ultimate strength and corrosion resistance.
$159.99